TYPE
Slimline, dual 10″ driver subwoofer
FREQUENCY RESPONSE (4PI) ¹
49 Hz – 100 Hz ± 3 dB, -10 db @ 41 Hz
DRIVER
10” (250 mm) with 2” (50 mm) long excursion voice coil, ferrite motor system
RATED POWER ²
400 W AES, 1600 W peak
REQUIRED ELECTRONICS
Processor and amplifier, or a combined amplifier-processor unit
RECOMMENDED ELECTRONICS
DX0.4, DX0.6 or DX4.0 system processor and VIA amplifier, or iKON amplifier-processor
SENSITIVITY ⁴
101 dB
MAXIMUM SPL ² ⁴
127 dB continuous, 133 dB peak, 139 dB peak with crest factor 4
NOMINAL IMPEDANCE
4 ohm
DISPERSION
Omnidirectional
CROSSOVER
Not applicable
ENCLOSURE
Durable plywood
FINISH
Black or white textured paint
PROTECTIVE GRILLE
Black or white perforated steel grille with scrim cloth backing
CONNECTORS
3 x NL4 connectors: 2 at bottom rear (input and link A), 1 at top rear (link B)
PIN CONNECTIONS (INPUT)
1+/1–
PIN CONNECTIONS (LINK A)
1+/1– to 1+/1– and 2+/2– to 2+/2–
PIN CONNECTIONS (LINK B)
2+/2– on input to 1+/1– on link B
FITTINGS
16 x M8 inserts: 2 on top, 2 on bottom, 4 on left, 4 on right, 4 on rear
2 x bar handles with recycled ABS pockets: 1 at rear top, 1 at rear bottom
M20 top-mounted thread plate for pole mounting
4 x skids on base
4 x skids on right side, 4 x recesses on left side: for stacking horizontally
DIMENSIONS
(W) 296 mm x (H) 718 mm x (D) 462 mm
(W) 11.7 in x (H) 28.3 in x (D) 18.2 in
WEIGHT
22.4 kg (49.4 lbs)

¹    On-axis in open space (4pi) with full-range preset.

²  2-hour test with band-limited pink noise signal as specified in AES2-1984 (r2003). Peak power defined as 6 dB above AES power.

³  1 W input at 1 meter in open space (4pi), measured in the 2pi (baffle) region.

⁴ 1 W input at 1 meter in half space (2pi).