M-2600D

M-2600D

Class H High Performance Professional linear design

HH M-Series power amplifiers are high power, 2U rack amplifers designed to provide maximum performance for demanding applications . Three models are available all featuring heavy duty low noise toroidal power supplies and rugged construction. Suitable for anywhere you need high fidelity, high power amplification Featuring high quality balanced XLR inputs, user selectable input sensitivity , SpeakON(®) Connectors, binding post outputs, status indicators, Twin volume controls and comprehensive protection circuits. HH has over five decades of experience designing quality power amplifiers, and indeed was one of the pioneers in this area.

Specifications

Amplifier Type
Class H High Performance Professional linear design
Controls
Volume Controls (per channel), Power switch, Input Sensitivity Switch, Bridge/Routing Mode Switch
Dimensions
88 x 482 x 297mm, 3.5 x 19 x 11.7″
Features
Soft start, comprehensive protection
Inputs
2x Balanced XLRs
Outputs
2x locking SpeakON® connectors, 4x 4mm binding posts (with safety cover), 2x Balanced XLR link outs
Output Power : 4 Ohm Stereo
2x2600W
Output Power : 8 Ohm Stereo
2x1500W
Output Power : 8 Ohm Bridge
5150W
System Type
2U Professional Power Amplifier
Weight
24.2Kg/pc, 53.4 lbs/pc
Cooling
Forced air, variable speed fan, air flow front to back
Damping Factor
>200
Input Sensitivity
0.775V/1.4V
Packed Weight
26.6Kg/pc, 58.6 lbs/pc
Protection
Soft start, VHF, RF, short circuit, over load, clip limit, over heat
S/N
≥100dB
Voltage Gain (8Ω)
37dB
Input Impedance (Bal/Unbal)
20KΩ/10KΩ
Frequency Response
20Hz – 20KHz (+0, -1dB)
Slew Rate
≥20V/µS
THD%
≤0.5% 20Hz-20kHz
Power Connector
Removeable IEC Power Cord C14
Carton Dimensions (Hwd)
160 x 580 x 540mm, 6.3 x 22.8 x 21.3″

HH M-Series power amplifiers are high power, 2U rack amplifers designed to provide maximum performance for demanding applications . Three models are available all featuring heavy duty low noise toroidal power supplies and rugged construction. Suitable for anywhere you need high fidelity, high power amplification Featuring high quality balanced XLR inputs, user selectable input sensitivity , SpeakON(®) Connectors, binding post outputs, status indicators, Twin volume controls and comprehensive protection circuits. HH has over five decades of experience designing quality power amplifiers, and indeed was one of the pioneers in this area.

M-1500D

M-1500D

Class H High Performance Professional linear design

HH M-Series power amplifiers are high power, 2U rack amplifers designed to provide maximum performance for demanding applications . Three models are available all featuring heavy duty low noise toroidal power supplies and rugged construction. Suitable for anywhere you need high fidelity, high power amplification Featuring high quality balanced XLR inputs, user selectable input sensitivity , SpeakON(®) Connectors, binding post outputs, status indicators, Twin volume controls and comprehensive protection circuits. HH has over five decades of experience designing quality power amplifiers, and indeed was one of the pioneers in this area.

Specifications

Amplifier Type
Class H High Performance Professional linear design
Controls
Volume Controls (per channel), Power switch, Input Sensitivity Switch, Bridge/Routing Mode Switch
Dimensions
88 x 482 x 297mm, 3.5 x 3.5 x 11.7″
Features
Soft start, comprehensive protection
Inputs
2x Balanced XLRs
Outputs
2x locking SpeakON® connectors, 4x 4mm binding posts (with safety cover), 2x Balanced XLR link outs
Output Power : 4 Ohm Stereo
2x1500W
Output Power : 8 Ohm Stereo
2x1250W
Output Power : 8 Ohm Bridge
2900W
System Type
2U Professional Power Amplifier
Weight
19.2Kg/pc, 42.3 lbs/pc
Cooling
Forced air, variable speed fan, air flow front to back
Damping Factor
>200
Input Sensitivity
0.775V/1.4V
Packed Weight
21.5Kg/pc, 47.4 lbs/pc
Protection
Soft start, VHF, RF, short circuit, over load, clip limit, over heat
S/N
≥100dB
Voltage Gain (8Ω)
37dB
Input Impedance (Bal/Unbal)
20KΩ/10KΩ
Frequency Response
20Hz – 20KHz (+0, -1dB)
Slew Rate
≥20V/µS
THD%
≤0.5% 20Hz-20kHz
Power Connector
Removeable IEC Power Cord C14
Carton Dimensions (Hwd)
160 x 580 x 540mm, 6.3 x 22.8 x 21.3″

HH M-Series power amplifiers are high power, 2U rack amplifers designed to provide maximum performance for demanding applications . Three models are available all featuring heavy duty low noise toroidal power supplies and rugged construction. Suitable for anywhere you need high fidelity, high power amplification Featuring high quality balanced XLR inputs, user selectable input sensitivity , SpeakON(®) Connectors, binding post outputs, status indicators, Twin volume controls and comprehensive protection circuits. HH has over five decades of experience designing quality power amplifiers, and indeed was one of the pioneers in this area.

M-750D

M-750D

Class H High Performance Professional linear design

HH M-Series power amplifiers are high power, 2U rack amplifers designed to provide maximum performance for demanding applications . Three models are available all featuring heavy duty low noise toroidal power supplies and rugged construction. Suitable for anywhere you need high fidelity, high power amplification Featuring high quality balanced XLR inputs, user selectable input sensitivity , SpeakON(®) Connectors, binding post outputs, status indicators, Twin volume controls and comprehensive protection circuits. HH has over five decades of experience designing quality power amplifiers, and indeed was one of the pioneers in this area.

Features

Amplifier Type
Class H High Performance Professional linear design
Controls
Volume Controls (per channel), Power switch, Input Sensitivity Switch, Bridge/Routing Mode Switch
Dimensions
88 x 482 x 239mm, 3.5 x 19 x 9.4″
Features
Soft start, comprehensive protection
Inputs
2x Balanced XLRs
Outputs
2x locking SpeakON® connectors, 4x 4mm binding posts (with safety cover), 2x Balanced XLR link outs
Output Power : 4 Ohm Stereo
2x750W
Output Power : 8 Ohm Stereo
2x500W
Output Power : 8 Ohm Bridge
1500W
System Type
2U Professional Power Amplifier
Weight
12.5Kg/pc, 27.6 lbs/pc
Cooling
Forced air, variable speed fan, air flow front to back
Damping Factor
>200
Input Sensitivity
0.775V/1.4V
Packed Weight
14.8Kg/pc, 32.6 lbs/pc
Protection
Soft start, VHF, RF, short circuit, over load, clip limit, over heat
S/N
≥100dB
Voltage Gain (8Ω)
36dB
Input Impedance (Bal/Unbal)
20KΩ/10KΩ
Frequency Response
20Hz – 20KHz (+0, -1dB)
Slew Rate
≥20V/µS
THD%
≤0.5% 20Hz-20kHz
Power Connector
Removeable IEC Power Cord C14
Carton Dimensions (Hwd)
160 x 580 x 540mm, 6.3 x 22.8 x 21.3″

HH M-Series power amplifiers are high power, 2U rack amplifers designed to provide maximum performance for demanding applications . Three models are available all featuring heavy duty low noise toroidal power supplies and rugged construction. Suitable for anywhere you need high fidelity, high power amplification Featuring high quality balanced XLR inputs, user selectable input sensitivity , SpeakON(®) Connectors, binding post outputs, status indicators, Twin volume controls and comprehensive protection circuits. HH has over five decades of experience designing quality power amplifiers, and indeed was one of the pioneers in this area.

SP26 Loudspeaker Processor

SP26

Loudspeaker Processor

HH Electronics are delighted to announce the release of the SP26 loudspeaker Processor.

Offering Power, Performance and Precision, the SP26 delivers high performance in an elegant, easy-to-use form. Offering the industry standard in Professional Speaker management.

Features

  • Powerful and precise 24 bit DSP engine.
  • High performance 2 in 6 out loudspeaker processor
  • High dynamic range
  • Convenient front panel controls or remote operation
  • Universal mains voltage operation

TESSEN TNA RAISES THE BAR FOR HH.

Since it’s conception in 1968, HH have delivered unparalleled engineering techniques with every product developed. The TNA line array range features outstanding quality and customisable options for live sound solutions. Included within the TNA range are the TNA-2051; dual 5 inch mid/high passive line array enclosure and the tna-1200s; 12-inch passive subwoofer. The TNA range provides choice solutions for live sound installation or portable, ground stacked front of house systems.

Powerful System Solutions

The SP26 loudspeaker processor is the perfect counterpart to any HH speaker system, suitable in an array of applications, such as live sound, indoor/outdoor events, public address, theatrical performance, and touring. It also comes pre-loaded with expertly created audio pre-sets for use with the TNA line array system, for easy setup straight out of the box.

Take Control

The SP26 features a dedicated PC control interface for remote monitoring and configuration via USB or RS485 connection.

Responsive Display

Easy setup is assured with a clear, responsive interactive LCD display for local setup.

Intuitive Control Surfaces

The SP26 features elegant, intuitive control surfaces. Making editing and storing presets simple and efficient.

GET CONNECTED

Featuring 2 analog inputs and 6 analog outputs, each managed by a powerful DSP Engine. Each input channel provides PEQ, gain control, Dynamic Low boost, noise gate function, RMS compressor, internal White/Pink Noise Generator, and configurable delay. Each output offers up to 7 PEQ and crossover filters.