PS-S210SUBT Bandpass Subwoofer

Professional Series

PS-S210SUBT Bandpass Subwoofer

The PS-S210SUBT utilizes all-new 2 x 10” (254mm) low profile, high excursion drivers, that were specifically engineered in-house by Sonance for this product. The polyurethane-coated, laminated-plywood enclosure features an extremely shallow design which allows it to be used in a wide range of specialty applications such as under restaurant booths or banquettes (using the included feet), or mounted onto the side of rafters, on walls or under ceilings (with the optional C-bracket).

One of the most unique and versatile features of the PS-S210SUBT is the ability to port either from the front or the side of the enclosure. The installer simply unscrews the port from the front of the cabinet, and then unscrews a blanking plate from the side, and swaps them. This will allow the product to be used in a variety of installation locations, while always ensuring the optimum sonic performance is achieved. 

The PS-S210SUBT features Sonance’s Laminated Core Technology transformer (SLCT), delivering full-fidelity performance in either 70V or 100V mode. This, combined with the built-in low pass filter, allows the subwoofer to be driven on the same feed as the other full-range loudspeakers in a system, negating the need for additional amplifier channels and DSP. 

PS-S210SUBT
Frequency Range (-10dB)
34Hz – 155Hz
Frequency Range (-3dB)
44Hz – 132 Hz
Power Capacity
500 Watts Continuous Program Power | 300 Watts Pink Noise
Nominal Sensitivity
94 dB
Nominal Coverage Angle
180 degrees conical coverage
Directivity Factor (Q)
N/A
Directivity (DI)
N/A
Rated Maximum SPL
121dB @ 1 meter (3.3 feet), 127dB peak
Rated Impedance
4 Ohms nominal, 3.7 Ohms minimum
Transformer Taps
300W, 150W, (75W 70V)
Crossover Point
150Hz
Overall Dimensions
9″ Height x 33″ Width x 13.78″ Depth (228mmx 838mm x 350mm)
Net Weight
61 lbs (27.7kgs)
Shipping Weight
75.8lbs (33 kgs)
Unit of Measure
Single
LF Driver
Dual 10″ (254mm) woven glass fiber cones with Butyl rubber surrounds
Input Connector
Four pin, Euroblock with loop output connections
Safety Agency
None
Suspension Points
4 x M10 on two sides
Cabinet
Laminated plywood
Optional Accessory
C-Bracket with 4 x M10 mounting bolts

ARE YOU INTERESTED TO LEARN MORE ABOUT SONANCE?

Speak to one of our Consultants now

PS-S83WT Surface Mount Woofer

Professional Series

PS-S83WT Surface Mount Woofer

Sonance Professional Series PS-S83WT Surface-Mount Woofer features the Patented FastMount® bracket and front cable connection to speed up the installation process and provide a clean appearance.

The IPX4 rated construction features a weatherproof high-impact, extreme temperature resistant cabinet and corrosion-proof powder coated aluminum grille, lending itself perfectly in both indoor and outdoor applications.

An ultra-high-excursion 8” polypropylene woofer delivers effortless and impactful low bass extension and augmentation, at any sound pressure level, making it the perfect partner for the PS-S43T, PS-S53T and PS-S63T Speakers.

A full-fidelity transformer delivers uncompromised sonic performance in either high (70V, 100V) or low (8 Ohm) impedance.

Additionally, the Sonance PS-S83WT is certified for UL 1480 and UL 2239.

Available in either black or white (paintable).

PS-S83WT
Frequency Range (-10dB)
32Hz – 300Hz
Frequency Range (-3dB)
50Hz – 150Hz
Power Capacity
200 Watts Continuous Program Power | 125 Watts Continuous Pink Noise
Nominal Sensitivity
88 dB
Nominal Coverage Angle
180 degrees x 180 degrees coverage
Directivity Factor (Q)
N/A
Directivity (DI)
N/A
Rated Maximum SPL
110dB @ 1 meter (3.3 feet) average, 116dB peak
Rated Impedance
8 Ohms nominal, 6 Ohms minimum
Transformer Taps
120W, 60W, 30W (15W 70V)
Crossover Point
150Hz
Overall Dimensions
14.02” Height x 9.01” Width x 8.58” Depth (356mm x 229mm x 218mm)
Net Weight
16.80lbs (7.62kg) each
Shipping Weight
21.49lbs (9.75kg) each
Unit of Measure
Each
Color
Black or White
Grille
Powder Coated Aluminum Friction Fit
LF Driver
8” (203mm) Polypropylene Cone, Butyl Rubber Surround
HF Drive
N/A
Input Connector
Front-mounted four pin, Euroblock with loop output connections
Safety Agency
UL 1480, UL 2239
Mounting Bracket
U-Bracket with Sonance FastMount
Environmental & UV
Conforms to MIL-STD-810 for humidity, salt spray, temperature, IEC 529 IPX4 splash-proof rating

ARE YOU INTERESTED TO LEARN MORE ABOUT SONANCE?

Speak to one of our Consultants now

PS-S83T Surface Mount Speaker

Professional Series

PS-S83T Surface Mount Speaker

Sonance Professional Series PS-S83T Surface-Mount Speaker features the Patented FastMount® bracket and front cable connection to speed up the installation process and provide a clean appearance.

The IPX4 rated construction features a weatherproof high-impact, extreme temperature resistant cabinet and corrosion-proof powder coated aluminum grille, lending itself perfectly in both indoor and outdoor applications.

A high-excursion 8” polypropylene woofer delivers effortless low bass extension, that is equal or better to systems using dedicated subwoofers, while the chambered 1” soft dome tweeter provides accurate high-end detail and exceptional coverage.

A full-fidelity transformer delivers uncompromised sonic performance in either high (70V, 100V) or low (8 Ohm) impedance.

Additionally, the Sonance PS-S83T is certified for is certified for UL 1480 (UEAY) and 2239.

Available in either black or white (paintable).

PS-S83T
Frequency Range (-10dB)
41Hz – 25kHz
Frequency Range (-3dB)
55Hz – 20kHz
Power Capacity
160 Watts Continuous Program Power | 80 Watts Continuous Pink Noise
Nominal Sensitivity
90 dB
Nominal Coverage Angle
90 degrees x 90 degrees coverage
Directivity Factor (Q)
7.6
Directivity (DI)
8.1 dB
Rated Maximum SPL
110dB @ 1 meter (3.3 feet) average, 116dB peak
Rated Impedance
8 Ohms nominal, 6 Ohms minimum
Transformer Taps
60W, 30W, 15W (7.5W 70V)
Crossover Point
2750Hz
Overall Dimensions
14.02” Height x 9.01” Width x 8.58” Depth (356mm x 229mm x 218mm)
Net Weight
14.72lbs (6.68kg) each
Shipping Weight
42.23lbs (19.16kg) pair
Unit of Measure
Pair (Single, upon request)
Color
Black or White
Grille
Powder Coated Aluminum Friction Fit
LF Driver
8” (203mm) Polypropylene Cone, Butyl Rubber Surround
HF Drive
1” (25mm) Cloth Dome, Ferrofluid cooled
Input Connector
Front-mounted four pin, Euroblock with loop output connections
Safety Agency
UL 1480, UL 2239
Mounting Bracket
U-Bracket with Sonance FastMount
Environmental & UV
Conforms to MIL-STD-810 for humidity, salt spray, temperature, IEC 529 IPX4 splash-proof rating

ARE YOU INTERESTED TO LEARN MORE ABOUT SONANCE?

Speak to one of our Consultants now

PS-S63T Surface Mount Speaker

Professional Series

PS-S63T Surface Mount Speaker

Sonance Professional Series PS-S63T Surface-Mount Speaker features the Patented FastMount® bracket and front cable connection to speed up the installation process and provide a clean appearance.

The IPX4 rated construction features a weatherproof high-impact, extreme temperature resistant cabinet and corrosion-proof powder coated aluminum grille, lending itself perfectly in both indoor and outdoor applications.

A high-excursion 6.5” polypropylene woofer delivers effortless low bass extension, that exceeds many larger competitive products, while the chambered 1” soft dome tweeter provides accurate high-end detail and exceptional coverage.

A full-fidelity transformer delivers uncompromised sonic performance in either high (70V, 100V) or low (8 Ohm) impedance.

Additionally, the Sonance PS-S63T is certified for is certified for UL 1480 (UEAY) and 2239.

Available in either black or white (paintable).

PS-S63T
Frequency Range (-10dB)
49Hz – 25kHz
Frequency Range (-3dB)
65Hz – 20kHz
Power Capacity
120 Watts Continuous Program Power | 60 Watts Continuous Pink Noise
Nominal Sensitivity
88 dB
Nominal Coverage Angle
90 degrees x 90 degrees coverage
Directivity Factor (Q)
6.5
Directivity (DI)
7.9 dB
Rated Maximum SPL
108dB @ 1 meter (3.3 feet) average, 116dB peak
Rated Impedance
8 Ohms nominal, 6 Ohms minimum
Transformer Taps
60W, 30W, 15W (7.5W 70V)
Crossover Point
2750Hz
Overall Dimensions
12.14” Height x 7.51” Width x 6.86” Depth (309mm x 191mm x 174mm)
Net Weight
11.43lbs (5.18kg) each
Shipping Weight
31.26lbs (14.18kg) pair
Unit of Measure
Pair (Single, upon request)
Color
Black or White
Grille
Powder Coated Aluminum Friction Fit
LF Driver
6.5” (165mm) Polypropylene Cone, Butyl Rubber Surround
HF Drive
1” (25mm) Cloth Dome, Ferrofluid cooled
Input Connector
Front-mounted four pin, Euroblock with loop output connections
Safety Agency
UL 1480, UL 2239
Mounting Bracket
U-Bracket with Sonance FastMount
Environmental & UV
Conforms to MIL-STD-810 for humidity, salt spray, temperature, IEC 529 IPX4 splash-proof rating

ARE YOU INTERESTED TO LEARN MORE ABOUT SONANCE?

Speak to one of our Consultants now

PS-S53T Surface Mount Speaker

Professional Series

PS-S53T Surface Mount Speaker

Sonance Professional Series PS-S53T Surface-Mount Speaker features the Patented FastMount® bracket and front cable connection to speed up the installation process and provide a clean appearance.

The IPX4 rated construction features a weatherproof high-impact, extreme temperature resistant cabinet and corrosion-proof powder coated aluminum grille, lending itself perfectly in both indoor and outdoor applications.

A high-excursion 5.25” polypropylene woofer delivers effortless low bass extension, that exceeds many larger competitive products, while the chambered 1” soft dome tweeter provides accurate high-end detail and exceptional coverage.

A full-fidelity transformer delivers uncompromised sonic performance in either high (70V, 100V) or low (8 Ohm) impedance.

Additionally, the Sonance PS-S53T is certified for is certified for UL 1480 (UEAY) and 2239.

Available in either black or white (paintable).

PS-S53T
Frequency Range (-10dB)
43Hz – 25kHz
Frequency Range (-3dB)
70Hz – 20kHz
Power Capacity
90 Watts Continuous Program Power | 45 Watts Continuous Pink Noise
Nominal Sensitivity
88 dB
Nominal Coverage Angle
90 degrees x 90 degrees coverage
Directivity Factor (Q)
7.0
Directivity (DI)
8.0 dB
Rated Maximum SPL
106dB @ 1 meter (3.3 feet) average, 113dB peak
Rated Impedance
8 Ohms nominal, 6 Ohms minimum
Transformer Taps
30W, 15W, 7.5W (3.8W 70V)
Crossover Point
2750Hz
Overall Dimensions
10.08” Height x 6.36” Width x 5.68” Depth (256mm x 162mm x 144mm)
Net Weight
8.68lbs (3.94kg) each
Shipping Weight
23.93lbs (10.85kg) pair
Unit of Measure
Pair (Single, upon request)
Color
Black or White
Grille
Powder Coated Aluminum Friction Fit
LF Driver
5.25” (130mm) Polypropylene Cone, Butyl Rubber Surround
HF Drive
1” (25mm) Cloth Dome, Ferrofluid cooled
Input Connector
Front-mounted four pin Euroblock with loop output connections
Safety Agency
UL 1480, UL 2239
Mounting Bracket
U-Bracket with Sonance FastMount
Environmental & UV
Conforms to MIL-STD-810 for humidity, salt spray, temperature, IEC 529 IPX4 splash-proof rating

ARE YOU INTERESTED TO LEARN MORE ABOUT SONANCE?

Speak to one of our Consultants now

PS-S43T Surface Mount Speaker

Professional Series

PS-S43T Surface Mount Speaker

Sonance Professional Series PS-S43T Surface-Mount Speaker features the Patented FastMount bracket and front cable connection to speed up the installation process and provide a clean appearance.

The IPX4 rated construction features a weatherproof high-impact, extreme temperature resistant cabinet and corrosion-proof powder coated aluminum grille, lending itself perfectly in both indoor and outdoor applications.

A high-excursion 4” polypropylene woofer delivers effortless low bass extension, that exceeds many larger competitive products, while the chambered 1” soft dome tweeter provides accurate high-end detail and exceptional coverage.

A full-fidelity transformer delivers uncompromised sonic performance in either high (70V, 100V) or low (8 Ohm) impedance.

Additionally, the Sonance PS-S43T is certified for is certified for UL 1480 (UEAY) and 2239.

Available in either black or white (paintable).

PS-S43T
Frequency Range (-10dB)
57Hz – 25kHz
Frequency Range (-3dB)
75Hz – 20kHz
Power Capacity
60 Watts Continuous Program Power | 30 Watts Continuous Pink Noise
Nominal Sensitivity
87 dB
Nominal Coverage Angle
90 degrees x 90 degrees coverage
Directivity Factor (Q)
7.6
Directivity (DI)
8.1 dB
Rated Maximum SPL
105dB @ 1 meter (3.3 feet) average, 110dB peak
Rated Impedance
8 Ohms nominal, 6 Ohms minimum
Transformer Taps
30W, 15W, 7.5W (3.8W 70V)
Crossover Point
3000Hz
Overall Dimensions
9.25” Height x 5.47” Width x 4.8” Depth (235mm x 139mm x 122mm)
Net Weight
6.79lbs (3.08kg) each
Shipping Weight
19.00lbs (8.62kg) pair
Unit of Measure
Pair (Single, upon request)
Color
Black or White
LF Driver
4” (100mm) Polypropylene Cone, Butyl Rubber Surround
HF Drive
1” (25mm) Cloth Dome, Ferrofluid cooled
Input Connector
Front-mounted four pin, Euroblock with loop output connections
Safety Agency
UL 1480, UL 2239
Mounting Bracket
U-Bracket with Sonance FastMount
Environmental & UV
Conforms to MIL-STD-810 for humidity, salt spray, temperature, IEC 529 IPX4 splash-proof rating

ARE YOU INTERESTED TO LEARN MORE ABOUT SONANCE?

Speak to one of our Consultants now

PS-P83WT Pendant Woofer

Professional Series

PS-P83WT Pendant Woofer

Sonance Professional Series PS-P83WT is a 70V/100V/8 Ohm selectable Pendant Speaker that utilizes a minimalistic design similar to pendant lighting to blend discreetly into the environment. It takes advantage of the same one-piece grille design as the In-Ceiling Speakers to deliver consistent sight lines when installed in the same space.

The integrated top cover hides the hanging hardware and wiring connector.

An ultra-high-excursion 8” polypropylene woofer delivers effortless and impactful low bass extension and augmentation, at any sound pressure level, making it the perfect partner for the PS-P43T and PS-P63T Pendant Speakers.

A full-fidelity transformer delivers uncompromised sonic performance in either high (70V, 100V) or low (8 Ohm) impedance.

Additionally, the Sonance PS-P83WT is certified for UL 1480 and UL 2239.

Available in either black or white (paintable).

PS-P83WT
Frequency Range (-10dB)
32Hz – 300Hz
Frequency Range (-3dB)
50Hz – 150Hz
Power Capacity
200 Watts Continuous Program Power | 125 Watts Continuous Pink Noise
Nominal Sensitivity
89 dB
Nominal Coverage Angle
180 degrees conical coverage
Directivity Factor (Q)
N/A
Directivity (DI)
N/A
Rated Maximum SPL
110dB @ 1 meter (3.3 feet) average, 116dB peak
Rated Impedance
8 Ohms nominal, 6 Ohms minimum
Transformer Taps
120W, 60W, 30W (15W 70V)
Crossover Point
150Hz
Overall Dimensions
11.06” Diameter x 19.7” Depth (281mm x 500mm)
Net Weight
17.71lbs (8.03kg) each
Shipping Weight
22.97lbs (10.42kg) each
Unit of Measure
Each
Color
Black or White
Grille
Bezel-less, powder coated, magnetically retained grille
LF Driver
8” (203mm) Polypropylene Cone, Butyl Rubber Surround
HF Drive
N/A
Input Connector
Four pin Euroblock with loop output connections
Safety Agency
UL 1480, UL 2239
Suspension Points
Five points, top mounted
Supplied Hanging Hardware
16.4’ (5m) Stainless Steel Cable with Snaphook x 2, Gripple Hanger x 2, Gripple Adjustment Tool x 1

ARE YOU INTERESTED TO LEARN MORE ABOUT SONANCE?

Speak to one of our Consultants now

PS-P83T Pendant Speaker

Professional Series

PS-P83T Pendant Speaker

Sonance Professional Series PS-P83T is a 70V/100V/8 Ohm selectable Pendant Speaker that utilizes a minimalistic design similar to pendant lighting to blend discreetly into the environment. It takes advantage of the same one-piece grille design as the In-Ceiling Speakers to deliver consistent sight lines when installed in the same space.

The integrated top cover hides the hanging hardware and wiring connector.

A high-excursion 8” polypropylene woofer delivers effortless low bass extension, even at high volumes, negating the need for additional woofers, while the pivoting chambered 1” soft dome tweeter can be directed to ensure accurate coverage, when speaker positioning is compromised.

A full-fidelity transformer delivers uncompromised sonic performance in either high (70V, 100V) or low (8 Ohm) impedance.

Additionally, the Sonance PS-P83T is certified for UL 1480 and UL 2239.

Available in either black or white (paintable).

PS-P83T
Frequency Range (-10dB)
41Hz – 25kHz
Frequency Range (-3dB)
55Hz – 20kHz
Power Capacity
160 Watts Continuous Program Power | 80 Watts Continuous Pink Noise
Nominal Sensitivity
90 dB
Nominal Coverage Angle
120 degrees conical coverage
Directivity Factor (Q)
7.6
Directivity (DI)
8.1 dB
Rated Maximum SPL
110dB @ 1 meter (3.3 feet) average, 116dB peak
Rated Impedance
8 Ohms nominal, 6 Ohms minimum
Transformer Taps
60W, 30W, 15W, (7.5W 70V)
Crossover Point
2750Hz
Overall Dimensions
11.06” Diameter x 19.7” Depth (281mm x 500mm)
Net Weight
16.26lbs (7.38kg) each
Shipping Weight
46.97lbs (21.31kg) pair
Unit of Measure
Pair (Single, upon request)
Color
Black or White
Grille
Bezel-less, powder coated, magnetically retained grille
LF Driver
8” (203mm) Polypropylene Cone, Butyl Rubber Surround
HF Drive
1” (25mm) Cloth Dome, Pivoting, Ferrofluid cooled
Input Connector
Four pin Euroblock with loop output connections
Safety Agency
UL 1480, UL 2239
Suspension Points
Five points, top mounted
Supplied Hanging Hardware
16.4’ (5m) Stainless Steel Cable with Snaphook x 4, Gripple Hanger x 2, Gripple Adjustment Tool x 2

ARE YOU INTERESTED TO LEARN MORE ABOUT SONANCE?

Speak to one of our Consultants now

PS-P63T Pendant Speaker

Professional Series

PS-P63T Pendant Speaker

Sonance Professional Series PS-P63T is a 70V/100V/8 Ohm selectable Pendant Speaker that utilizes a minimalistic design similar to pendant lighting to blend discreetly into the environment. It takes advantage of the same one-piece grille design as the In-Ceiling Speakers to deliver consistent sight lines when installed in the same space.

The integrated top cover hides the hanging hardware and wiring connector.

A high-excursion 6” polypropylene woofer delivers effortless low bass extension, that exceeds most 8″ competitive products, while the pivoting chambered 1” soft dome tweeter can be directed to ensure accurate coverage, when speaker positioning is compromised.

A full-fidelity transformer delivers uncompromised sonic performance in either high (70V, 100V) or low (8 Ohm) impedance.

Additionally, the Sonance PS-P63T is certified for UL 1480 and UL 2239.

Available in either black or white (paintable).

PS-P63T
Frequency Range (-10dB)
49Hz – 25kHz
Frequency Range (-3dB)
65Hz – 20kHz
Power Capacity
120 Watts Continuous Program Power | 60 Watts Continuous Pink Noise
Nominal Sensitivity
88 dB
Nominal Coverage Angle
120 degrees conical coverage
Directivity Factor (Q)
6.5
Directivity (DI)
7.9 dB
Rated Maximum SPL
108dB @ 1 meter (3.3 feet) average, 116dB peak
Rated Impedance
8 Ohms nominal, 6 Ohms minimum
Transformer Taps
60W, 30W, 15W (7.5W 70V)
Crossover Point
2750Hz
Overall Dimensions
9.13” Diameter x 15.6” Depth (232mm x 396mm)
Net Weight
11.63lbs (5.28kg) each
Shipping Weight
33.38lbs (15.14kg) pair
Unit of Measure
Pair (Single, upon request)
Color
Black or White
Grille
Bezel-less, powder coated, magnetically retained grille
LF Driver
6.5” (165mm) Polypropylene Cone, Butyl Rubber Surround
HF Drive
1” (25mm) Cloth Dome, Pivoting, Ferrofluid cooled
Input Connector
Four pin Euroblock with loop output connections
Safety Agency
UL 1480, UL 2239
Suspension Points
Five points, top mounted
Supplied Hanging Hardware
16.4’ (5m) Stainless Steel Cable with Snaphook x 4, Gripple Hanger x 2, Gripple Adjustment Tool x 2

ARE YOU INTERESTED TO LEARN MORE ABOUT SONANCE?

Speak to one of our Consultants now

PS-P43T Pendant Speaker

Professional Series

PS-P43T Pendant Speaker

Sonance Professional Series PS-P43T Pendant Speaker utilizes a minimalistic design similar to pendant lighting to blend discreetly into the environment, and take advantage of the same one-piece grille design as the In-Ceiling Speakers to deliver consistent sight lines when installed in the same space.

The integrated top cover hides the hanging hardware and wiring connector.

A high-excursion 4” polypropylene woofer delivers effortless low bass extension, that exceeds most 6.5″ and even 8″ competitive products, while the pivoting chambered 1” soft dome tweeter can be directed to ensure accurate coverage, when speaker positioning is compromised.

A full-fidelity transformer delivers uncompromised sonic performance in either high (70V, 100V) or low (8 Ohm) impedance.

Additionally, the Sonance PS-P43T is certified for UL 1480 and UL 2239.

Available in either black or white (paintable).

PS-P43T
Frequency Range (-10dB)
57Hz – 25kHz
Frequency Range (-3dB)
75Hz – 20kHz
Power Capacity
60 Watts Continuous Program Power | 30 Watts Continuous Pink Noise
Nominal Sensitivity
87 dB
Nominal Coverage Angle
120 degrees conical coverage
Directivity Factor (Q)
7.6
Directivity (DI)
8.1 dB
Rated Maximum SPL
105dB @ 1 meter (3.3 feet) average, 110dB peak
Rated Impedance
8 Ohms nominal, 6 Ohms minimum
Transformer Taps
30W, 15W, 7.5W (3.8W 70V)
Crossover Point
3000Hz
Overall Dimensions
6.3” Diameter x 11” Depth (160mm x 280mm)
Net Weight
6.45lbs (2.93kg) each
Shipping Weight
18.92lbs (8.58kg) pair
Unit of Measure
Pair (Single, upon request)
Color
Black or White
Grille
Bezel-less, powder coated, magnetically retained grille
LF Driver
4” (100mm) Polypropylene Cone, Butyl Rubber Surround
HF Drive
1” (25mm) Cloth Dome, Pivoting, Ferrofluid cooled
Input Connector
Four pin Euroblock with loop output connections
Safety Agency
UL 1480, UL 2239
Supplied Hanging Hardware
Bracket/Tile Bridge

ARE YOU INTERESTED TO LEARN MORE ABOUT SONANCE?

Speak to one of our Consultants now