CONNECT SERIES

CS1504 & CS1504D

HIGH POWER SMART AMP | 4 CH | 1500 WATTS/CH

Introducing the CONNECT 1504 high-power IoT-enabled smart amps. This four-channel model drives 1,500 watts per channel (into 2, 4, and 8 ohms as well as 70Vrms and 100Vrms). This addition to the CONNECTSERIES amplifiers is available in NETWORK CONNECT and DANTE CONNECT versions, including both Dante and AES 67 connectivity options. With three different methods of network connection, users can connect using the amplifier’s built-in Wi-Fi Access Point, connecting to an existing Wi-Fi network, or using a Local Area Network Ethernet connection.

Then there’s the Cloud…The CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.

U.S. Customers can register your product to extend your warranty to 6 years

AUDIO SPECIFICATIONS
INPUTS
Analog: 4 Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity
THD+N
0.1% (20Hz to 20kHz)
FREQUENCY RESPONSE
20Hz to 20kHz, +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω
SIGNAL TO NOISE LEVEL
105dB (20Hz to 20kHz referenced to 8Ω)
CROSSTALK
70dB (20Hz to 20kHz)
AMPLIFIER OUTPUT CLASSIFICATION
Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel
DSP
DSP ARCHITECTURE
Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
INPUT MATRIX
Routable matrix; any input to any output with primary and secondary input priority
CROSSOVERS
Advanced DSP with Linear Phase FIR Crossovers and up to 48dB/Octave IIR Filters (Linkwitz Riley and Butterworth)
PARAMETRIC EQ
16 Band Parametric EQ per channel
OUTPUT DELAY
4 seconds per channel
OUTPUT PROTECTION
DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection
USER ADJUSTABLE LIMITING
Peak Voltage and RMS Voltage
LOAD MONITORING
Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources
CONTROL, MONITORING, NETWORKING
USER INTERFACE
Web Browser User Interface, 3rd Party API control, or CLOUD control
EXTERNAL I/O
External I/O In: Toggles Remote On/Off
External I/O Out: Indicates Amplifier Health
OPERATION
AC MAINS
100VAC – 240VAC +/- 15% 50Hz or 60Hz
POWER SUPPLY
Universal Switch Mode Power Supply with Power Factor Correction
PHYSICAL SPEC
DIMENSIONS (L X W X H)
Product: 17.88” x 19” x 2U (362mm x 482mm x 2U) (362mm x 482mm x 2U)
Shipping: TBD
WEIGHT
26lbs / 11.8kg | Shipping: 30 lbs / 13.6 kg
COOLING
Front to Rear Variable Fan Speed Cooling
Fan Noise at idle is 50dB @ 1m
Fan Noise at 50% is 57dB @1m
Fan Noise at full speed is 63dB @ 1m

Features

  • 3 WAYS TO CONNECT
    1. Built-in Wi-Fi Access Point
    2. Existing Wi-Fi Network
    3. Local Area Network
  • WEB BROWSER-BASED UI
    Works on any web browser on any device with no software downloads
  • CLOUD CONTROL
    Remote control and monitoring from anywhere in the world — no VPN needed
  • DIRECT LOW-Z & HI-Z
    70V or 100V selectable per channel
  • SMART POWER BRIDGE
    Double the power any any single channel without sacrificing other amp channels
  • UNIVERSAL SWITCH-MODE POWER SUPPLY
    with PFC — Operation from 100VAC – 240VAC +/-15%
  • ANALOG BALANCED INPUTS
    Fully routable via input matrix in Web UI or Cloud platform
  • 96KHZ ANALOG DEVICES DSP
    with linear phase FIR filters, up to 4 seconds of delay, Input Routing, multiple 48dB/Oct crossover filters, 16 Parametric EQ filters, user-configurable speaker limiters, and real-time load monitoring
  • EXTERNAL I/O PORT
    For Remote ON/OFF and Fault Monitoring
  • 96kHz Analog Devices DSP with Input Routing, multiple 48dB/Oct crossover filters, 8 Parametric EQ filters, user configurable speaker limiters, and real time load monitoring
  • HIGHLY EFFICIENT CLASS-D OUTPUT STAGE
    For low AC Current Draw

product range

Power ratings are stated on a per-channel basis. Ex: 80 Watts at 8 ohms = 80 Watts on each individual channel of the amplifier.
MODEL
2Ω
4Ω
8Ω
70V / 100V
CONNECT 88
40W
80W
80W
80W
CONNECT 168
80W
160W
160W
160W
CONNECT 84
40W
80W
80W
80W
CONNECT 164
80W
160W
160W
160W
CONNECT 354
175W
350W
350W
350W
CONNECT 704
350W
700W
700W
700W
CONNECT 352
175W
350W
350W
350W
CONNECT 702
350W
700W
700W
700W
CONNECT 1504
1500W
1500W
1500W
1500W
CONNECT 1504D
1500W
1500W
1500W
1500W

ARE YOU INTERESTED TO LEARN MORE ABOUT LEA PROFESSIONAL?

Speak to one of our Consultants now