TYPE | Compact, passive two-way loudspeaker |
FREQUENCY RESPONSE ¹ | 63 Hz – 17 kHz ± 3 dB, -10 db @ 48 Hz |
DRIVER (LF) | 10” (250 mm) with 2.5” (63 mm) voice coil, ferrite motor system |
DRIVER (HF) | 1″ (25 mm) exit compression driver with 1.4″ (36 mm) voice coil, polyimide dome |
RATED POWER ² | 250 W AES, 1000 W peak |
REQUIRED ELECTRONICS | Processor and amplifier, or a combined amplifier-processor unit |
RECOMMENDED ELECTRONICS | DX0.4, DX0.6 or DX4.0 system processor and VIA amplifier, or iKON amplifier-processor |
SENSITIVITY ³ | 95 dB |
MAXIMUM SPL ³ | 119 dB continuous, 125 dB peak, 131 dB peak with crest factor 4 |
NOMINAL IMPEDANCE | 8 ohm |
DISPERSION | Dispersion: 90°–110° (horizontal) × 50° (vertical)
User-rotatable Differential Dispersion horn |
CROSSOVER | 3 kHz passive |
ENCLOSURE | Symmetrical multi-angle plywood |
FINISH | Black textured paint |
PROTECTIVE GRILLE | Black perforated steel grille with scrim cloth backing |
CONNECTORS | 2 x NL4 connectors |
PIN CONNECTIONS (INPUT) | 1+/1– |
PIN CONNECTIONS (LINK) | 1+/1– to 1+/1– and 2+/2– to 2+/2– |
FITTINGS | 15 x M8 inserts, 6 x M8 inserts for wall bracket
1 x bar handle with recycled ABS pocket Pole-mount socket with removable cover |
DIMENSIONS | (W) 300 mm x (H) 545 mm x (D) 310 mm
(W) 11.8 in x (H) 21.5 in x (D) 12.2 in |
WEIGHT | 15.3 kg (33.7 lbs) |
¹ On-axis in open space (4pi) with full-range preset.
² 2-hour test with band-limited pink noise signal as specified in AES2-1984 (r2003). Peak power defined as 6 dB above AES power.
³ 1 W input at 1 meter in open space (4pi), measured in the 2pi (baffle) region.
The loudspeaker shall be a passive, two-way system. Its transducers shall consist of a reflex-loaded 10” (250 mm) low-frequency driver with a 2.5” (63 mm) voice coil and a 1” (25 mm) exit high-frequency compression driver with a 1.4” (36 mm) dome, mounted on a user-rotatable Differential Dispersion horn to enable vertical or horizontal orientation of the enclosure.
Horizontal dispersion shall taper from 90° to 110° along the vertical axis to optimise near and far field coverage. Vertical dispersion shall be 50° total (+20° / –30°). The on-axis frequency response shall be 63 Hz to 17 kHz (±3 dB), with low-frequency extension down to 48 Hz (–10 dB). The loudspeaker shall produce a peak SPL of 125 dB (131 dB with crest factor 4) at 1 metre. Nominal impedance shall be 8 ohms. The loudspeaker shall require external amplification and processing. For optimal performance, it shall be used in conjunction with a dedicated electronic controller such as a Martin Audio DX series processor, paired with a VIA series amplifier, or with an iKON series combined amplifier and processor.
The rear connector panel shall be fitted with two NL4 connectors. The enclosure shall be constructed from multi-angle plywood and finished in black textured paint. It shall be fitted with a pole-mount socket with a removable cover and M8 threaded inserts to accommodate wall brackets, yokes or eyebolt suspension. The drivers shall be protected by a screw-fixed, perforated steel grille with a cloth backing. An integrated ergonomic handle made from recycled ABS shall be included.
Dimensions (W x H x D) shall be 300 mm x 545 mm x 310 mm (11.8 in x 21.5 in x 12.2 in). Weight shall be 15.3 kg (33.7 lbs).
The loudspeaker shall be the Martin Audio Blackline Q10.
Optional: Wall bracket WB6/8, M8 eye bolt HTKCT05, yoke, transit cover
Two-Channel 2500W Class D Amplifier Lightweight 2U Rack Height
450 Watts/Channel @ 8 Ohms
Four-Channel 5000W Class D Amplifier Lightweight 2U Rack Height
450 Watts/Channel @ 8 Ohms
Two-Channel 5000W Class D Amplifier Lightweight 2U Rack Height
1600 Watts/Channel @ 8 Ohms
Four-Channel 2000W Class D Amplifier Lightweight 2U Rack Height
250 Watts/Channel @ 8 Ohms
Do you have an upcoming event or project and need assistance on product selection? Or do you need expert advice? Drop us a note, we are ready to help.
