Professional Series

PS-P43T Pendant Speaker

Sonance Professional Series PS-P43T Pendant Speaker utilizes a minimalistic design similar to pendant lighting to blend discreetly into the environment, and take advantage of the same one-piece grille design as the In-Ceiling Speakers to deliver consistent sight lines when installed in the same space.

The integrated top cover hides the hanging hardware and wiring connector.

A high-excursion 4” polypropylene woofer delivers effortless low bass extension, that exceeds most 6.5″ and even 8″ competitive products, while the pivoting chambered 1” soft dome tweeter can be directed to ensure accurate coverage, when speaker positioning is compromised.

A full-fidelity transformer delivers uncompromised sonic performance in either high (70V, 100V) or low (8 Ohm) impedance.

Additionally, the Sonance PS-P43T is certified for UL 1480 and UL 2239.

Available in either black or white (paintable).

Frequency Range (-10dB)
57Hz – 25kHz
Frequency Range (-3dB)
75Hz – 20kHz
Power Capacity
60 Watts Continuous Program Power | 30 Watts Continuous Pink Noise
Nominal Sensitivity
87 dB
Nominal Coverage Angle
120 degrees conical coverage
Directivity Factor (Q)
Directivity (DI)
8.1 dB
Rated Maximum SPL
105dB @ 1 meter (3.3 feet) average, 110dB peak
Rated Impedance
8 Ohms nominal, 6 Ohms minimum
Transformer Taps
30W, 15W, 7.5W (3.8W 70V)
Crossover Point
Overall Dimensions
6.3” Diameter x 11” Depth (160mm x 280mm)
Net Weight
6.45lbs (2.93kg) each
Shipping Weight
18.92lbs (8.58kg) pair
Unit of Measure
Pair (Single, upon request)
Black or White
Bezel-less, powder coated, magnetically retained grille
LF Driver
4” (100mm) Polypropylene Cone, Butyl Rubber Surround
HF Drive
1” (25mm) Cloth Dome, Pivoting, Ferrofluid cooled
Input Connector
Four pin Euroblock with loop output connections
Safety Agency
UL 1480, UL 2239
Supplied Hanging Hardware
Bracket/Tile Bridge



Speak to one of our Consultants now