Available in three finishes (Silver anodised semi-matt aluminium; Black anodised semi-matt aluminium; White painted semi-matt aluminium), the VR2 has many customisable features including programmable side-bezel RGB lighting which can follow controls defined by colour, customisable screensaver logo upload, and choice of either vertical or horizontal mounting.
The VR2 wall panel control is designed to fit into the provided bracket, and is secured with two countersunk screws into the top and two underneath at the bottom. The bracket is surface mounted onto the wall with four screws.
The VR2 is programmed using the our D-Net software and can be set-up to allow control of one or more NST Audio processors connected to the same network as the wall panel.
The VR2 allows multiple pages of custom remote access to the following parameters :
As panes are added to the VR2, they will appear in real time, and there is no “save” procedure required. This configuration information is stored indefinitely in the VR2. Multiple VR2 panels (and VR1 panels) can be configured to operate in a single venue with different sets of control panes defined.
The VR2 has a real time clock and calendar (with daylight savings time compensation). This can be used to trigger recurring memory recalls. For example, to reset the system back to known defaults every morning, or to control EQ or levels via preset recalls at various points in the day/evening.
It is also possible to set up different user levels and protect each with a PIN code. Each user can be granted access to any or all defined panes, and this system can be used for either “vertical” security control (so users permissions based on seniority) or “horizontal” control (so, creating users to group controls, such as a “Lobby” user only seeing volume and source select for the Lobby).
The VR2 can also be configured “offline” and the configuration downloaded at the time of installation.
Once set-up, the VR2 requires no technical knowledge to operate, allowing venue personnel to operate the device with ease. The full colour LCD display allows all pages to be labelled by the install engineer, leaving venue staff with a clear, simple and easy to use remote which enables them to adjust the configuration and volume of the system audio in multiple locations, throughout the venue.
The latest firmware, for NST Audio devices, is included as part of the D-Net software, that can be downloaded from the D-Net page: