Woofers

Subwoofers and Woofers

Woofers

  • Designed to enhance bass levels when combined with Visual Performance Series speakers.
  • Creates depth and fullness at low and medium listening levels and deep punchy bass at louder volumes.
  • Consistent low-profile design with other Visual Performance Series speakers.
  • Available in round, square or rectangle to achieve a consistent aesthetic.
VP85R W
VP85 W
Woofer
8″ (203mm) long-throw carbon fiber cone, rubber surround
8″ (203mm) long-throw carbon fiber cone, with a rubber surround
Impedance
8 ohms nominal; 6 ohms minimum
8 ohms nominal; 6 ohms minimum
Frequency Response
35Hz – 250Hz ±3dB
35Hz – 250Hz ±3dB
Power Handling
5 watts minimum; 150 watts maximum
5 watts minimum; 150 watts maximum
Sensitivity
90dB SPL (2.83V/1 meter)
90dB SPL (2.83V/1 meter)
Speaker Depth
3 7/8″ (98mm)
3 7/8″ (98mm)
Dimensions
11 5/8″ (295mm)
10″ x 16″ (254mm x 406mm)
Cut-Out Dimensions
10 1/8″ (257mm)
8 1/2in x 14 1/2in (216mm x 368mm)
Grille Material
Perforated steel
Perforated steel
Shipping Weight
13 lbs (5.8 kg) each
13 lbs (5.8 kg) each
Requirement
*DSP 2-150 or DSP 8-130 MKII amplifiers sold separately
*DSP 2-150 or DSP 8-130 MKII amplifiers sold separately

ARE YOU INTERESTED TO LEARN MORE ABOUT SONANCE?

Speak to one of our Consultants now

Subwoofers

Subwoofers and Woofers

Subwoofers

  • Finish solutions to match Visual Performance, Architectural Series, and TRUFIG style installations
  • Pair with Sonance DSP Amplifiers for custom-tuned performance
  • Designed for in-wall and in-ceiling applications, adding low end balance and removing visual intrusion
BPS8
VPSUB
Woofer
8″ (203mm) dual voice coil, carbon fiber/ Rohacell laminated cone with a rubber surround
10″ (254mm) laminated carbon fiber cone with a rubber surround
Frequency Response
30Hz – 90Hz – ±3dB
34Hz – 250Hz ±3dB
Impedance
6 ohms nominal; 4 ohms minimum
8 ohms nominal
Power Handling
150 watts maximum
260 Watts
Sensitivity
90dB SPL (2.83V/1 meter)
90dB SPL (2.83V/1 meter)
Internal Crossover Frequency
90Hz @12dB per Octave
Cutout Dimensions
12 3/4″ x 12 3/4″ (324mm x 324mm)
Dimensions
24″ x 12 5/16″ x 9 1/4″ (610mm x 313mm x 235mm)
15″ x 15″ x 3 7/8″ (381mm x 381mm x 98mm)
Shipping Weight
45 lbs (20.41 kg) each
13 lbs (6kg)
Requirements
*VPBPC4R or VPBPC6R (Bandpass Connectors with Grilles); sold separately
*Sonance DSP 2-150 or DSP Sonance DSP 8-130 MKII (using two channels bridged)
Grille
6 7/8″ or 9 3/4″ (175mm or 248mm) diameter round, paintable perforated steel
15″ (381mm) square, paintable perforated steel

ARE YOU INTERESTED TO LEARN MORE ABOUT SONANCE?

Speak to one of our Consultants now

Subwoofers and Woofers Series

Subwoofers and Woofers

ARE YOU INTERESTED TO LEARN MORE ABOUT SONANCE?

Speak to one of our Consultants now