SmartAmp 30

SmartAmp 30

4 x 250W amplifier with integral DSP

SmartAmp 30 is an amplifier with built in Digital Signal Processing (DSP) specifically tailored to optimise the performance of the Optimal Audio loudspeaker range.

This four-channel 1U, 19”, power amplifier can drive both conventional low impedance and 70V – 100V loudspeaker loads. Internal DSP presets of Optimal Audio loudspeakers are selected by switches to the rear of the amplifier, which enable the appropriate EQ and overload protection settings.

The SmartAmp 30 can be configured to drive either low or high impedance loads at a maximum of 250W per channel, giving the options of a localised or evenly distributed speaker system. 

The SmartAmp 30 is ideally suited to power multiple Up 6 speakers and models from the Cuboid series.

Features

  • Desktop or rack mounted
  • Signal processing presets for Optimal Audio loudspeakers
  • 250 watts per channel into 4Ω-16Ω and 70V-100V line loudspeaker load

Applications

  • Bars/Restaurants & Cafes
  • Retail
  • Wedding Venues
  • Hotels
  • Education Facilities
  • Houses of Worship
  • Corporate Offices
  • Museums
  • Fitness Studios
  • Residential

SmartAmp 20

SmartAmp 20

4 x 125W amplifier with integral DSP

SmartAmp 20 is an amplifier with built in Digital Signal Processing (DSP) specifically tailored to optimise the performance of the Optimal Audio loudspeaker range.

This four-channel power amplifier can drive either conventional low impedance or 70V – 100V loudspeaker loads. Internal DSP presets of Optimal Audio loudspeakers are selected by switches to the rear of the amplifier, which enable the appropriate EQ and overload protection settings.

The space efficient half-width, 1U, 19” rack housing enables two units to be mounted side by side with a SmartAmp 10 or another SmartAmp 20, allowing up to 8 channels in a 1U space.

The SmartAmp 20 is capable of a maximum of 250W output shared between each pair of channels. This enables SmartAmp 20 to flexibly deliver power required for each channel within a pair, depending on the system requirement. For example, if one channel was to only be using 20W of power for some Up speakers, the other channel in the pair could deliver the remaining 230W of power for a more demanding application.

Features

  • Desktop or rack mounted
  • Signal processing presets for Optimal Audio loudspeakers
  • 125 watts per channel into 4Ω-16Ω and 70V-100V line loudspeaker loads
  • Power sharing technology enables 250 watts from two pairs of channels

Applications

  • Bars/Restaurants & Cafes
  • Retail
  • Wedding Venues
  • Hotels
  • Education Facilities
  • Houses of Worship
  • Corporate Offices
  • Museums
  • Fitness Studios
  • Residential

SmartAmp 10

SmartAmp 10

2 x 125W amplifier with integral DSP

SmartAmp 10 is an amplifier with built in Digital Signal Processing (DSP) specifically tailored to optimise the performance of the Optimal Audio loudspeaker range.

This two-channel power amplifier can drive both conventional low impedance and 70V – 100V loudspeaker loads. Internal DSP presets of Optimal Audio loudspeakers are selected by switches to the rear of the amplifier, which enable the appropriate EQ and overload protection settings.

The space efficient half-width, 1U, 19” rack housing enables two units to be mounted side by side with another SmartAmp 10 or SmartAmp 20 allowing up to 6 channels in a 1U space.

The SmartAmp 10 is capable of a maximum of 250W output shared between the two channels. This enables SmartAmp 10 to flexibly deliver power required for each channel depending on the system requirement. For example, if channel one was to only be using 20W of power for some Up speakers, channel two could deliver the remaining 230W of power for a more demanding application.

Features

  • Desktop or rack mounted
  • Signal processing presets for Optimal Audio loudspeakers
  • 125 watts per channel into 4Ω-16Ω and 70V-100V line loudspeaker loads
  • Power sharing technology enables 250 watts from a single channel

Applications

  • Bars/Restaurants & Cafes
  • Retail
  • Wedding Venues
  • Hotels
  • Education Facilities
  • Houses of Worship
  • Corporate Offices
  • Museums
  • Fitness Studios
  • Residential

SmartAmp

SmartAmp

Amplifiers with DSP

SmartAmp is a series of amplifiers with DSP, competitively priced for the commercial market to accompany our loudspeakers and control offering.

A core offering of three multichannel direct drive constant voltage amplifiers with 30 DSP settings available for maximum performance of Optimal Audio loudspeakers. Flexible configuration makes SmartAmp the natural choice for installation projects.

Features

  • Cost competitive fit for the commercial market to accompany our loudspeakers and control offering
  • 30 internal DSP for presets for Optimal Audio loudspeakers
  • Flexible configuration for a wide range of applications

Applications

  • Bars/Restaurants & Cafes
  • Retail
  • Wedding Venues
  • Hotels
  • Education Facilities
  • Houses of Worship
  • Corporate Offices
  • Museums
  • Fitness Studios
  • Residential

Amplifiers

Amplifiers

Amplifiers

Optimal Audio offers a range of amplifiers, to partner our loudspeaker and control offering.

  • High performance, easy to install and use
  • Care and validation of sonic qualities as standard with high reliability
  • Cost competitive for the installation sector