M-2600D

M-2600D

Class H High Performance Professional linear design

HH M-Series power amplifiers are high power, 2U rack amplifers designed to provide maximum performance for demanding applications . Three models are available all featuring heavy duty low noise toroidal power supplies and rugged construction. Suitable for anywhere you need high fidelity, high power amplification Featuring high quality balanced XLR inputs, user selectable input sensitivity , SpeakON(®) Connectors, binding post outputs, status indicators, Twin volume controls and comprehensive protection circuits. HH has over five decades of experience designing quality power amplifiers, and indeed was one of the pioneers in this area.

Specifications

Amplifier Type
Class H High Performance Professional linear design
Controls
Volume Controls (per channel), Power switch, Input Sensitivity Switch, Bridge/Routing Mode Switch
Dimensions
88 x 482 x 297mm, 3.5 x 19 x 11.7″
Features
Soft start, comprehensive protection
Inputs
2x Balanced XLRs
Outputs
2x locking SpeakON® connectors, 4x 4mm binding posts (with safety cover), 2x Balanced XLR link outs
Output Power : 4 Ohm Stereo
2x2600W
Output Power : 8 Ohm Stereo
2x1500W
Output Power : 8 Ohm Bridge
5150W
System Type
2U Professional Power Amplifier
Weight
24.2Kg/pc, 53.4 lbs/pc
Cooling
Forced air, variable speed fan, air flow front to back
Damping Factor
>200
Input Sensitivity
0.775V/1.4V
Packed Weight
26.6Kg/pc, 58.6 lbs/pc
Protection
Soft start, VHF, RF, short circuit, over load, clip limit, over heat
S/N
≥100dB
Voltage Gain (8Ω)
37dB
Input Impedance (Bal/Unbal)
20KΩ/10KΩ
Frequency Response
20Hz – 20KHz (+0, -1dB)
Slew Rate
≥20V/µS
THD%
≤0.5% 20Hz-20kHz
Power Connector
Removeable IEC Power Cord C14
Carton Dimensions (Hwd)
160 x 580 x 540mm, 6.3 x 22.8 x 21.3″

HH M-Series power amplifiers are high power, 2U rack amplifers designed to provide maximum performance for demanding applications . Three models are available all featuring heavy duty low noise toroidal power supplies and rugged construction. Suitable for anywhere you need high fidelity, high power amplification Featuring high quality balanced XLR inputs, user selectable input sensitivity , SpeakON(®) Connectors, binding post outputs, status indicators, Twin volume controls and comprehensive protection circuits. HH has over five decades of experience designing quality power amplifiers, and indeed was one of the pioneers in this area.

M-1500D

M-1500D

Class H High Performance Professional linear design

HH M-Series power amplifiers are high power, 2U rack amplifers designed to provide maximum performance for demanding applications . Three models are available all featuring heavy duty low noise toroidal power supplies and rugged construction. Suitable for anywhere you need high fidelity, high power amplification Featuring high quality balanced XLR inputs, user selectable input sensitivity , SpeakON(®) Connectors, binding post outputs, status indicators, Twin volume controls and comprehensive protection circuits. HH has over five decades of experience designing quality power amplifiers, and indeed was one of the pioneers in this area.

Specifications

Amplifier Type
Class H High Performance Professional linear design
Controls
Volume Controls (per channel), Power switch, Input Sensitivity Switch, Bridge/Routing Mode Switch
Dimensions
88 x 482 x 297mm, 3.5 x 3.5 x 11.7″
Features
Soft start, comprehensive protection
Inputs
2x Balanced XLRs
Outputs
2x locking SpeakON® connectors, 4x 4mm binding posts (with safety cover), 2x Balanced XLR link outs
Output Power : 4 Ohm Stereo
2x1500W
Output Power : 8 Ohm Stereo
2x1250W
Output Power : 8 Ohm Bridge
2900W
System Type
2U Professional Power Amplifier
Weight
19.2Kg/pc, 42.3 lbs/pc
Cooling
Forced air, variable speed fan, air flow front to back
Damping Factor
>200
Input Sensitivity
0.775V/1.4V
Packed Weight
21.5Kg/pc, 47.4 lbs/pc
Protection
Soft start, VHF, RF, short circuit, over load, clip limit, over heat
S/N
≥100dB
Voltage Gain (8Ω)
37dB
Input Impedance (Bal/Unbal)
20KΩ/10KΩ
Frequency Response
20Hz – 20KHz (+0, -1dB)
Slew Rate
≥20V/µS
THD%
≤0.5% 20Hz-20kHz
Power Connector
Removeable IEC Power Cord C14
Carton Dimensions (Hwd)
160 x 580 x 540mm, 6.3 x 22.8 x 21.3″

HH M-Series power amplifiers are high power, 2U rack amplifers designed to provide maximum performance for demanding applications . Three models are available all featuring heavy duty low noise toroidal power supplies and rugged construction. Suitable for anywhere you need high fidelity, high power amplification Featuring high quality balanced XLR inputs, user selectable input sensitivity , SpeakON(®) Connectors, binding post outputs, status indicators, Twin volume controls and comprehensive protection circuits. HH has over five decades of experience designing quality power amplifiers, and indeed was one of the pioneers in this area.

M-750D

M-750D

Class H High Performance Professional linear design

HH M-Series power amplifiers are high power, 2U rack amplifers designed to provide maximum performance for demanding applications . Three models are available all featuring heavy duty low noise toroidal power supplies and rugged construction. Suitable for anywhere you need high fidelity, high power amplification Featuring high quality balanced XLR inputs, user selectable input sensitivity , SpeakON(®) Connectors, binding post outputs, status indicators, Twin volume controls and comprehensive protection circuits. HH has over five decades of experience designing quality power amplifiers, and indeed was one of the pioneers in this area.

Features

Amplifier Type
Class H High Performance Professional linear design
Controls
Volume Controls (per channel), Power switch, Input Sensitivity Switch, Bridge/Routing Mode Switch
Dimensions
88 x 482 x 239mm, 3.5 x 19 x 9.4″
Features
Soft start, comprehensive protection
Inputs
2x Balanced XLRs
Outputs
2x locking SpeakON® connectors, 4x 4mm binding posts (with safety cover), 2x Balanced XLR link outs
Output Power : 4 Ohm Stereo
2x750W
Output Power : 8 Ohm Stereo
2x500W
Output Power : 8 Ohm Bridge
1500W
System Type
2U Professional Power Amplifier
Weight
12.5Kg/pc, 27.6 lbs/pc
Cooling
Forced air, variable speed fan, air flow front to back
Damping Factor
>200
Input Sensitivity
0.775V/1.4V
Packed Weight
14.8Kg/pc, 32.6 lbs/pc
Protection
Soft start, VHF, RF, short circuit, over load, clip limit, over heat
S/N
≥100dB
Voltage Gain (8Ω)
36dB
Input Impedance (Bal/Unbal)
20KΩ/10KΩ
Frequency Response
20Hz – 20KHz (+0, -1dB)
Slew Rate
≥20V/µS
THD%
≤0.5% 20Hz-20kHz
Power Connector
Removeable IEC Power Cord C14
Carton Dimensions (Hwd)
160 x 580 x 540mm, 6.3 x 22.8 x 21.3″

HH M-Series power amplifiers are high power, 2U rack amplifers designed to provide maximum performance for demanding applications . Three models are available all featuring heavy duty low noise toroidal power supplies and rugged construction. Suitable for anywhere you need high fidelity, high power amplification Featuring high quality balanced XLR inputs, user selectable input sensitivity , SpeakON(®) Connectors, binding post outputs, status indicators, Twin volume controls and comprehensive protection circuits. HH has over five decades of experience designing quality power amplifiers, and indeed was one of the pioneers in this area.

M Series

M Series

Professional Power Amplifier

HH M-Series power amplifiers are high power, 2U rack amplifers designed to provide maximum performance for demanding applications . Three models are available all featuring heavy duty low noise toroidal power supplies and rugged construction. Suitable for anywhere you need high fidelity, high power amplification Featuring high quality balanced XLR inputs, user selectable input sensitivity , SpeakON(®) Connectors, binding post outputs, status indicators, Twin volume controls and comprehensive protection circuits. HH has over five decades of experience designing quality power amplifiers, and indeed was one of the pioneers in this area.

SP26 Loudspeaker Processor

SP26

Loudspeaker Processor

HH Electronics are delighted to announce the release of the SP26 loudspeaker Processor.

Offering Power, Performance and Precision, the SP26 delivers high performance in an elegant, easy-to-use form. Offering the industry standard in Professional Speaker management.

Features

  • Powerful and precise 24 bit DSP engine.
  • High performance 2 in 6 out loudspeaker processor
  • High dynamic range
  • Convenient front panel controls or remote operation
  • Universal mains voltage operation

TESSEN TNA RAISES THE BAR FOR HH.

Since it’s conception in 1968, HH have delivered unparalleled engineering techniques with every product developed. The TNA line array range features outstanding quality and customisable options for live sound solutions. Included within the TNA range are the TNA-2051; dual 5 inch mid/high passive line array enclosure and the tna-1200s; 12-inch passive subwoofer. The TNA range provides choice solutions for live sound installation or portable, ground stacked front of house systems.

Powerful System Solutions

The SP26 loudspeaker processor is the perfect counterpart to any HH speaker system, suitable in an array of applications, such as live sound, indoor/outdoor events, public address, theatrical performance, and touring. It also comes pre-loaded with expertly created audio pre-sets for use with the TNA line array system, for easy setup straight out of the box.

Take Control

The SP26 features a dedicated PC control interface for remote monitoring and configuration via USB or RS485 connection.

Responsive Display

Easy setup is assured with a clear, responsive interactive LCD display for local setup.

Intuitive Control Surfaces

The SP26 features elegant, intuitive control surfaces. Making editing and storing presets simple and efficient.

GET CONNECTED

Featuring 2 analog inputs and 6 analog outputs, each managed by a powerful DSP Engine. Each input channel provides PEQ, gain control, Dynamic Low boost, noise gate function, RMS compressor, internal White/Pink Noise Generator, and configurable delay. Each output offers up to 7 PEQ and crossover filters.

TRE-1001

TRE-1001

High-grade Class D Bi-amplifier

The Tensor TRE-1001’s design has been tailored to deliver unparalleled performance within a compact enclosure. The high-grade Class D bi-amplifier provides impressive output performance, while the intelligent on-board DSP optimises and protects your system from failure. With 4 pre-set audio modes, the TRE-1001 is instantly customisable. Perfect for DJ, live band, monitoring or announcements. The integrated 2 channel mixer allows instant connection from a wide-array of devices. All this contained in an ultra lightweight, multi-angle enclosure with 2 molded carry handles and 4 M8 suspension points.

Features

  • 4 inch hh designed coaxial woofer
  • 100v transformer power taps: 30w, 15w, 6w
  • 70v trasnformer power taps: 15w, 7.5w, 3w
  • 106 db max spl (1m)
  • 4 position front power tap
  • Push spring input connectors

The HH TNi range has been engineered to provide the best audio performance, combined with compact dimensions and flexible mounting options to suit a wide range of installation projects.

From music venues to retail stores, cafes and restaurants to meeting rooms and public buildings, places of worship, fitness studios and hotels the TNi series are the ideal solution.

The five passive and two active models all feature high performance 2-way designs with timbre balancing across the range, enabling different models to seamlessly integrate in one installation. With renowned HH woofers and LaVoce compression drivers; the TNi family offer precisely controlled directivity and superb voice clarity for all speech applications, but also dynamic, musical response for foreground or background music use.

The HH TNi range are available in white or black finishes to suit your application

TRM-1201

TRM-1201

Ultra Efficient 1400 Watt Class D Amplifier

The Tensor TRM-1201 is a compact, active monitor; featuring a HH high-grade 12-inch driver with 1-inch compression driver. The ultra efficient 1400 Watt Class D amplifier delivers optimal power output for demanding applications. Dual audio modes provide effective voicing options for versatile operation, whether that’s live band, DJ or conference. The 6.3mm / XLR combination input socket enables simple connection. Combined with a painted, light-weight solid plywood enclosure with 35mm pole mount for tripod mounting, the Tensor TRM-1201 is the perfect active monitoring solution.

Features

  • 4 inch hh designed coaxial woofer
  • 100v transformer power taps: 30w, 15w, 6w
  • 70v trasnformer power taps: 15w, 7.5w, 3w
  • 106 db max spl (1m)
  • 4 position front power tap
  • Push spring input connectors

The HH TNi range has been engineered to provide the best audio performance, combined with compact dimensions and flexible mounting options to suit a wide range of installation projects.

From music venues to retail stores, cafes and restaurants to meeting rooms and public buildings, places of worship, fitness studios and hotels the TNi series are the ideal solution.

The five passive and two active models all feature high performance 2-way designs with timbre balancing across the range, enabling different models to seamlessly integrate in one installation. With renowned HH woofers and LaVoce compression drivers; the TNi family offer precisely controlled directivity and superb voice clarity for all speech applications, but also dynamic, musical response for foreground or background music use.

The HH TNi range are available in white or black finishes to suit your application

TNA-1800SA

TNA-1800SA

18-inch Low Frequency Woofer

The TNA-1800SA Active subwoofer features a HH designed 18-inch low frequency woofer with exceptional high output. Equipped with integrated rigging hardware, the TNA-1800SA can be installed quickly and easily. The TNA-1800SA offers a max SPL of 138 dB and offers a frequency response as low as 32Hz. The TNA-1800SA offers an ideal venue installation or point source solution. Ideal for venues, schools, sports, gyms, hotels and more.

Features

  • 4 inch hh designed coaxial woofer
  • 100v transformer power taps: 30w, 15w, 6w
  • 70v trasnformer power taps: 15w, 7.5w, 3w
  • 106 db max spl (1m)
  • 4 position front power tap
  • Push spring input connectors

The HH TNi range has been engineered to provide the best audio performance, combined with compact dimensions and flexible mounting options to suit a wide range of installation projects.

From music venues to retail stores, cafes and restaurants to meeting rooms and public buildings, places of worship, fitness studios and hotels the TNi series are the ideal solution.

The five passive and two active models all feature high performance 2-way designs with timbre balancing across the range, enabling different models to seamlessly integrate in one installation. With renowned HH woofers and LaVoce compression drivers; the TNi family offer precisely controlled directivity and superb voice clarity for all speech applications, but also dynamic, musical response for foreground or background music use.

The HH TNi range are available in white or black finishes to suit your application

TNA-2120SA

TNA-2120SA

12-inch Low Frequency Woofers

The TNA-2120SA is a multi-channel active subwoofer for powering a complete TNA line array system. The TNA-2120SA features two high power 12-inch low frequency woofers with exceptionally high output. The TNA-2120SA active subwoofer houses three channels of high performance amplification and cutting edge built in DSP presets. As a modular system, the TNA-2120SA is capable of powering up to 6 x TNA-2051 line array satellite cabinets. With Integrated rigging hardware, and optional suspension bracket and dolly board, the TNA-2120SA can be installed quickly and easily. The TNA-2120SA offers a max SPL of 137dB and offers a frequency response as low as 35Hz. When combined upto six TNA-2051’s, the TNA-2120SA offers an ideal venue installation or point source solution without the extra expense of rack amplifiers and processors. Ideal for venues, schools, sports, gyms, hotels and more.

Features

  • 4 inch hh designed coaxial woofer
  • 100v transformer power taps: 30w, 15w, 6w
  • 70v trasnformer power taps: 15w, 7.5w, 3w
  • 106 db max spl (1m)
  • 4 position front power tap
  • Push spring input connectors

The HH TNi range has been engineered to provide the best audio performance, combined with compact dimensions and flexible mounting options to suit a wide range of installation projects.

From music venues to retail stores, cafes and restaurants to meeting rooms and public buildings, places of worship, fitness studios and hotels the TNi series are the ideal solution.

The five passive and two active models all feature high performance 2-way designs with timbre balancing across the range, enabling different models to seamlessly integrate in one installation. With renowned HH woofers and LaVoce compression drivers; the TNi family offer precisely controlled directivity and superb voice clarity for all speech applications, but also dynamic, musical response for foreground or background music use.

The HH TNi range are available in white or black finishes to suit your application

TNI-W8PRO-WH

TNi-W8PRO-WH

8-inch 2 way Passive Speaker, Bass Reflex

The HH TNi-W8PRO is a high power, compact, 2-way, full-range loudspeaker system comprised of the HH 8-inch (2-inch voice coil) high power HH low frequency driver and 1-inch Celestion CDX1-1070 high-frequency compression driver. The HH/Celestion designed waveguide is rotatable so the loudspeaker can be used in either vertical or horizontal orientation. Flexible input connections via either M4 barrier strip or Euroblock provide versatile connecting options. Mounting options include: 7 x M10 Penn-Elcom fly points, 4 x M8 mounting points for optional TNi-BRK30 mounting bracket. All enclosed in a robust wooden enclosure, powdercoated steel grille with acoustic foam backing in black or white finish.

Features

  • 4 inch hh designed coaxial woofer
  • 100v transformer power taps: 30w, 15w, 6w
  • 70v trasnformer power taps: 15w, 7.5w, 3w
  • 106 db max spl (1m)
  • 4 position front power tap
  • Push spring input connectors

The HH TNi range has been engineered to provide the best audio performance, combined with compact dimensions and flexible mounting options to suit a wide range of installation projects.

From music venues to retail stores, cafes and restaurants to meeting rooms and public buildings, places of worship, fitness studios and hotels the TNi series are the ideal solution.

The five passive and two active models all feature high performance 2-way designs with timbre balancing across the range, enabling different models to seamlessly integrate in one installation. With renowned HH woofers and LaVoce compression drivers; the TNi family offer precisely controlled directivity and superb voice clarity for all speech applications, but also dynamic, musical response for foreground or background music use.

The HH TNi range are available in white or black finishes to suit your application